No matter how long the equipment wants to use for a long time, it is inseparable from our careful care about it. Of course, the aluminum window and door machine is no exception. In order to ensure that customers use our products better, we will come together together. Learn how to maintain the aluminum alloy doors and window equipment.
1. Lubrication and maintenance
1. The bed circular rail is lubricated with mechanical oil.
2. After every 5,000 hours of the aluminum window door machine, it should be replaced when the bearing should not be exchanged when the bearing is not available.
3. The relative motion parts of the parts in the sawtop should pay attention to regular lubrication and maintenance, extend its service life, and remove dandruff and dust before lubrication.
4. Maintenance of the gas source processor: Put the water once a shift of the water signs and clean it once a week. The oil atromer guarantees a certain amount of oil level.
Second, maintenance
1. For a period of time, the saw blade of the aluminum alloy doors and window equipment should be removed for the blade grinding to keep the saw blade sharp. If the damage or the blade is severely worn, it should be replaced. There are special wrenchs. Specifies using wrenches to apply force direction as the direction of sawing tablets are the same as the cutting direction of the saw tablet.
2. Regularly check the parts of the parts of the aluminum alloy doors and windows. If there is a loose place, it should be tightened in time.
The above is some of the relevant knowledge of the daily maintenance and maintenance of aluminum alloy doors and window equipment. I hope it can help everyone.
Post time: Jan-04-2023